Publicidad
Idiomas disponibles
Idiomas disponibles
EN
UNIFIX 300
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with
the panel:
Support
Unifix 300 = 15 kg
Fastening: to prevent large quantities of snow from accumulating behind the sensor, install appropriate
barrier grids.
The position of the solar panel influences your electrical production. Choose the most optimal inclination
and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow (eg
tree)
Before attaching and connecting, please observe:
•
the maximum distances between each element shown below.
•
connecting order
Unifix wiring with Uniconnect 1.6 connection kit
Panel 3
1 m
max
(1)
Possibility to extend the distance between the panels by one additional meter, by adding a Unicable
612B and 612 R (cables not supplied with the Uniconnect 1.6 kit).
(2)
Battery connection kit, not included with Uniconnect 1.6 (optional).
Connection order
In case of disconnection please proceed in reverse order. For more information, refer to the operating
manual of your photovoltaic charge regulator.
16
Unisun 80.12M (x3) / 100.12M (x3) / 100.24M (x3) /
110.12BC (x3) / 150.12M (x2) / 150.12BC (x2) / 200.24M
Panel 2
1 m
max
(1)
connection regulator ➔ batterie
connecting solar panel ➔ regulator
connecting regulator ➔ electrical usage
Panel
panel 1
(1)
1
www.uniteck.fr
=19kg / 23kg / 23kg/
21kg/ 20kg/ 19kg /14kg
Cable-
Regulator
8 m max
2 m max
Batteries
1
4 m
max
(2)
2
Publicidad
