Volpi KV81 Manual De Uso página 27

Charger
1 Rated voltage
2 Output voltage
3 Charging current
4 Class
5 Charging time
10. Charging the Battery
Don't' dispose battery under high temperature or vibration environment to avoid liquid
leakage hurt body.
isconnect the battery from tool before charging.
D
Always make sure the battery is dry and clean before charging.
•
Make sure the battery is fully charged before first time using.
•
The battery is not fully charged when you buy, you must charge 3-4 hours before using first time.
•
Need to replace battery if battery running time is not enough. Users can only use the original
equipment manufactured by the customer center (OEM) battery pack.
•
Keep safety rules and environment protection information in mind all the time.
10.1 Battery charging procedure
•
Charge at temperature of ＋10°C~＋22°C indoor.
•
Connect adaptor of charger with battery correctly.
•
Make sure specifications on battery and adapter matched before charging.
•
Red LED light on the charger indicates the battery is charging, green LED light indicates fully
charged, average charging time is about 3-4 hours.
•
Please make sure the battery charged at least once every 4 months when the battery is not using.
11 Working environment
•
Keep temperature of environment at 10°C ~ 22°C when charging battery, 0°C ~ +45°C when battery
is working.
•
Keep tool at temperature of 0°C ~ 60°C when working
12 Assemble
Please check pruner and battery all clean and dry.
•
Insert the battery into the battery slot until it clicks, making sure it is locked in place
100-240V AC, 50-60Hz
DC 21 V
1.4A
II
4h
27