DHP DA4088239 Manual De Instrucciones página 11

STEP 6
Place the space block (H) vertically against corner post to start the series of slats (E).
Attach slat (E) to side rail (C) and center support (F) with screws (3), with Phillips screw driver
(not included).
With spacer (H) horizontally along (C) against the first slat (E), space out the following slat
(E). Secure with screw, and repeat for the remaining slats.
NOTE: If you notice that any of the slats (E) are not perfectly flat, be sure to assemble them
so that the slats (E) curves up in the middle and down on the ends.
QUEEN BED
DA4088239/DA4088039
H
3 3
28 PCS 28 PCS