Publicidad
Idiomas disponibles
Idiomas disponibles
Dynamic ice
making icon
Cleaning
icon
Large ice
icon
CLEAN
button
Small ice
icon
1. Plug in power, the display screen light up and the machine will start the de-icing function
first. The machine will automatically enter the standby mode after no operation.
2. CLEAN BUTTON: cleaning function, press the CLEAN button, then press the
START/STOP button, the machine will automatically enter the cleaning function. The water
box rotates, the water pump pumps water and pours water, so as to carry out 5 cycles.
Please do not turn off the power during the cleaning, the machine automatically enters the
standby mode after cleaning.
3. S/L BUTTON: Select the ice size mode. The default is the large ice production mode.
The icon of the selected mode is displayed. The production time of small ice is 7 minutes
and that of large ice is 8 minutes.
4. START/STOP BUTTON: After plugging in power, press the START/STOP button, the
machine starts the ice making function, the default is the large ice production mode.
5. Time display: After the machine starts ice making, the time starts counting. The
calculated time starts counting in minutes. The time displayed by the machine does not
stop during the operation of the machine. When 99:99 is displayed, the time is reset to zero
again, and so on.
CONTROL PANEL
Ice size
selection button
Ice making time
Water shortage
alarm
Ice full
alarm
START/STOP
button
Publicidad
