Clamper SPD e- TEL Manual De Instalación página 19

4. INSTALLATION
4.1 Safety warnings:
Attentuion
Antes de iniciar la instalación, debe comprobarse la integridad física del
producto y, si hay algún fallo, debe sustituirse.
4.2 Place of installation:
Suggested step-by-step
1. Plug the SPD e-CLAMPER TEL into the power outlet. The LED light will
ascend, signaling that the protector is in operation.
2. Plug your broadband modem or computer directly into the SPD e-CLAMPER
TEL power socket.
3. Unplug the telephone cable from the broadband modem or computer (if it
has an internal fax-modem board) and plug it into the connector, RJ11 model,
identified as "LINE" of the SPD e-CLAMPER TEL.
4. Use the telephone cable that comes with the SPD e-CLAMPER TEL to plug
into the connector, model RJ11, identified as "EQUIPMENT".
5. Plug the shielded telephone cable into the fax modem board of your
computer or broadband modem.
Alert
This equipment is not designed for use in hazardous/explosive areas.
Atenção Alert
CLAMPER Indústria e Comércio S.A.
3
1
2
www.clamper.com.br |
4
5
26183133
+55 31 3689 9500
Page 19 of 21