Publicidad
Idiomas disponibles
Idiomas disponibles
1
2
3
4
1) POWER BUTTON
Plug in the power and the machine is in standby mode. Press the POWER button, the
"POWER" indicator light is always on, then enters the working state and the default to
mode is large ice. The "LARGE ICE" indicator light is always on, the ice block will be made
automatically. After the ice making is completed, the deicing will be carried out, and then
the ice shoveling function will be entered, and so on
2) SELECT BUTTON
Plug in the power, turn on power switch and press the SELECT button to select large ice,
small ice and cleaning mode. Select any function, the corresponding function indicator light
flashes for 5 seconds, and then automatically confirms and switches to the function, and
the corresponding function indicator is always on. In standby mode, the SELECT button is
invalid for this operation. When the indoor temperature is lower than 15 , small ice is
recommended. When the indoor temperature is higher than 30
recommended.
3) CLEANING FUNCTION
Plug in the power, press on the POWER button turns on the machine, then press the
SELECT button to switch to the cleaning function, and the product cleaning function starts.
The POWER indicator light and CLEANING indicator light are always on. Do not
disconnect the power supply during the cleaning. After the cleaning, the product
automatically enters the standby mode.
CONTROL PANEL
English - 6
5
6
7
① Cleaning indicator light
② Small ice indicator light
③ Large ice indicator light
④ SELECT button
⑤ ADD WATER indicator light
⑥ ICE full indicator light
⑦ POWER indicator light
8
⑧ POWER button
, large ice is
Publicidad
