Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly - Hanging the Fan (continued)
3
Making the electrical connection
IMPORTANT: Use the plastic wire connectors (AA) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
NOTE: The fan comes with 54 in. lead wires for use with an
extended ball/ downrod assembly. If using the 4.5 in. ball/
downrod assembly (D) provided, you can cut the lead wires to
your desired length (no shorter than 12 in.). This will make extra
room in the canopy (B). If you do not wish to cut the wires, you
will need to neatly wrap them.
□
Connect the fan motor white wires to the household white wire
using a wire connecting nut (AA).
□
Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (AA).
□
Secure each wire connecting nut (AA) using electrical tape.
□
Turn the wire connecting nut (AA) upward and push the wiring into
the outlet box (MM).
Black
White
Blue
Black
Outlet box
in ceiling
(MM)
Green or Bare
Green
AA (x3)
4
Wrapping the extra wire
NOTE: Follow this step ONLY if you did not cut the extra length off
from the wires coming from the ceiling fan.
□
Gently wrap the excess wire around the mounting bracket.
□
Secure with electrical tape.
9
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM
Publicidad
