Neoline X-COP 9300s Guia De Inicio Rapido página 4

2. Neoline Fuse Cord 3 pin
Connect the power cord to the fuse box as the diagram shows.
Connect the power cord to the fuse box in accordance with the instructions:
- Connect the BATT (+) power cord to the source providing stable 12V voltage.
- Connect the ACC cord to the power source (ignition circuit).
- Connect the GND (-) cord to the car earth.
Controls and functions
Up/Down
1. Press to adjust the volume.
2. When in Menu, press to switch the Menu titles.
3. Press and hold both keys for 2 seconds to turn the radar module on or off, where necessary. When
the radar mode is off, the mode icon is inactive.
Anti-glare CPL filter
The CPL filter helps reducing glares and reflections
on the windshield. Besides, it improves the video
contrast significantly. Rotate the filter to minimize
the glares. It is best to use the filter in the day time
as the image may darken at night. Around the hybrid
lens, there are special notches to mount the CPL
filter.
3