Neoline X-COP 9300s Guia De Inicio Rapido página 6

Menu + Select
Press and hold both keys for 2 seconds to enable/disable the Z-signature filter.
Hot Key
Press and hold for 2 seconds to assign one of the Hot Key functions below:
- pressing the Hot Key adjusts the display brightness.
It is useful at night when the display brightness is excessive.
- pressing the Hot Key adds a Red Zone.
A Red Zone is a zone that requires your special attention. (E.g. a section of speed bumps, a school, a
busy intersection, a quick hide, etc.)
When in a Red Zone, press the Hot Key to unmark the zone red.
- when receiving a false warning, pressing the Hot Key adds a Silent Zone.
A Silent Zone is a zone where broadband signals are detected, but where there are no police radars
(false warnings). This may occur near gas stations or shops with automatic entrance doors. When
entering a Silent Zone, the proper icon is displayed.
When in a Silent Zone, press the Hot Key to unmark the zone silent.
- pressing the Hot Key saves the current video to the Event folder (memory card). The
Event folder keeps the videos recorded at the G-sensor (bump sensor) on.
On/Off
1. Press and hold for 2 seconds to turn the device on/off manually without stopping the car engine.
2. Press once to mute voice announcements.
Note Since the hybrid has no battery power source, it has to be connected to the car socket to work
properly. However, it has a built-in super condenser to ensure any current video recording is finished
properly in case the device turns off.
5