Publicidad
Idiomas disponibles
Idiomas disponibles
LCD display will show the selected effect. You can preview each disco
light within the Sharp Life App.
Strobe light
1. Press the
button to turn on the strobe light. Press again to turn
off.
2. Press and hold the
button to enable a 5-second strobe blast.
NOTE:
ū In Duo Mode you can adjust the disco light and strobe light using either
the LEFT or RIGHT unit.
EPILEPSY WARNING
• Before using the strobe light, please check if nearby persons are
vulnerable to rapid flashing light. If present, do not use the strobe
light.
• Certain people with epilepsy and photo-sensitivity may suffer a seizure
if exposed to flashing or strobe lighting.
DJ FX
Buttons 1-6 allow you to quickly play a variety of DJ effects.
The DJ effects can be activated whilst the party speaker is in any mode.
There are 12 effects loaded into the XParty Street Beat. You can use the
Sharp Life App to assign any effect to the button of your choice.
For more information about app control, please read the section below
titled "Sharp Life App"
Using your unit outdoors
The XParty Street Beat can be used outdoors with its IPX4 rated splash
resistance.
Sharp Life App
You can download the Sharp Life App onto your smart device.
The app allows full control of the XParty Street Beat.
You can play any of the 12 DJ FX and assign your favourites to the control
panels buttons (1 to 6), change or preview the disco lights, change the
source input or even control the volume.
To pair the app to the XParty Street Beat, do the following:
1. Initial set up
If you're connecting to the app for the first time, but have previously
connected a device to play audio via Bluetooth, you will need to
disconnect your Bluetooth device.
To disconnect the Bluetooth connection, press and hold the
button when on Bluetooth source.
2. Scan the QR code below to download the app. The app is compatible
with most iOS and Android systems.
3. Once downloaded, open the app and register an account (if not
already completed).
4. Once registered, return to the home screen. Click on "Add Device".
Your device will scan automatically for the XParty Street Beat.
5. Once the XParty Street Beat is found, tap the + symbol to begin the
pairing process.
When pairing is complete, tap the device icon and the XParty Street Beat
interface will load.
The interface mirrors the top panel of the XParty Street Beat whilst
allowing access to additional features.
To assign a new DJ FX to the physical buttons, for example:
1. Press and hold one of the DJ FX buttons on the app.
2. Select from the pop up list a DJ FX you would like to add to the
button.
3. The selected DJ FX is now assigned to that button.
To download the app, use this QR code to go automatically to the
download page or visit: https://www.sharpconsumer.com/sharp-life-app
NOTE:
ū You can only pair the XParty Street Beat to one Sharp Life account at a
time.
Factory reset
Long press the EQ button to reset the unit to factory settings.
Upon a successful reset, the LCD will display <RESET>.
NOTE:
ū Please note your DJ FX will return to their factory positions if you have
changed them via the app.
EN
Publicidad
