Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Before claiming for repair, check the machine as follows
Machine will not start
Power failure
Not plugged in
Damaged plug or socket
Broken fuse
Machine stops
Timed watering or programmed
automatically
temperature reached
No cooling in
Ambient temperature lower
cooling mode
than set
Machine goes into frost protection
The led shows the fault
Ambient temperature sensor fails
code "E2"
or is damaged
The led shows fault
Evaporator oil pipe sensor fails or
code "E5"
is damaged
LED shows fault code "E4"
Water full warning
102
Plug
Replace the power cord or socket
Replace fuse by service provider
(specification 3.15A/250VAC)
Restart or wait for automatic
switchover
This is a normal phenomenon, the
machine will switch automatically
when the ambient temperature is
higher than the set temperature
The machine will switch
automatically when the frost
protection is over
Replace ambient temperature
sensor
Replace evaporator coil pipe
sensor
Drain water
WARRANTY
The manufacturer provides warranty in accordance with the legislation of the customer's country of residence.
This product is warranted for 3 years from the date of purchase.
Warranty repairs can only be carried out by an authorised service centre.
In order to claim the warranty, the original purchase invoice (with the date of purchase) must be presented and
the product must be complete and with all its accessories.
The warranty does not apply in cases of:
•
Normal wear and tear
•
Lack of maintenance
•
Incorrect use, e.g. overloading of the appliance, use of non-approved accessories.
•
non-approved accessories
•
use of force, damage caused by external influences
•
Incorrect installation or improper use
•
Damage caused by non-observance of the user manual, e.g. connection to an unsuitable mains supply or
use of non-approved accessories.
•
Damage caused by non-observance of the user manual, e.g. connection to an unsuitable mains supply or
non-compliance with the installation instructions.
•
Partially or completely disassembled appliances.
PRECAUTIONS
•
Keep the unit at least 1 metre away from televisions or radios to avoid electromagnetic interference.
•
Do not expose the unit to direct sunlight to avoid fading of the surface.
•
Do not tilt the unit more than 35° or place it upside down during transportation.
•
Place the unit on a flat surface with less than 5° tilt.
•
The unit operates more efficiently in certain locations (see Technical Specifications).
•
Technical specifications).
•
Empty the condensate drain pan at the end of the season to prolong the life of the product.
•
prolong the life of the product
•
Do not use chemical solvents (e.g. benzene or alcohol) to clean the surface of the unit.
•
Be sure to turn off the power before disassembling or installing the air inlet fence.
•
Please empty the water from the water tank, if you want to move the machine.
•
The battery must be removed from the machine before scrapping.
•
The battery must be disposed of safely
•
The plug must be removed before cleaning, servicing or filling the appliance.
103
Publicidad
