Manuales relacionados para Truper ROTO-1/2N6
Resumen de contenidos para Truper ROTO-1/2N6
- Página 1 Manual Hammer Drill 0.93 Hp 1/2” Power Chuck Applies for: Code Model 19457 ROTO-1/2N6 ROTO-1/2N6 Read the user’s manual thoroughly CAUTION before operating this tool.
- Página 2 Contents CAUTION Technical Data Power Requirements To gain the best performance of the tool, prolong the duty life, General Power Tool Safety Warnings make the Warranty valid if necessary, and to avoid hazards Safety Warnings for of fatal injuries please read and Drills and Hammer Drills understand this Manual before using the tool.
- Página 3 Technical Data ROTO-1/2N6 Code 19457 Description Hammer Drill Chuck 1/2” Voltage 127 V Frequency 60 Hz Current Functions Drill | Hammer drill Power 0.93 Hp Strokes per minute 0 49, 600 strokes/min Speed 0 - 3 100 RPM Work Capacity Steel: 3/8”...
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instruction listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety Warnings for Drills and Hammer Drills Select the Right Bit While Operating the Hammer Drill CAUTION • Select the right bit for the material. • Hold the tool using both the main handle and the This reduces the risk of severe injuries and makes the auxiliary handle if supplied with the tool.
- Página 6 Parts Depth Impact-Rotation Control Rod Selector Handle Chuck Speed Continuous Rotation Auxiliary Control Operation Button Selection Handle Button Power Cord Protector Switch Power Cable Chuck Key Holder Chuck Preparation Auxiliary Handle and Depth Control Rod Assembly 1. Turn the auxiliary handle in a Depth clockwise direction while released so Control Rod...
- Página 7 Preparation Chuck Bit Fitting • Put the bit into the chuck until it stops. Fasten with the chuck key and tighten the chuck alternatively into each of the orifices. WARNING • Clean burr and any other foreign object from the bit and the chuck. Otherwise, the bit cannot be tight and could cause personal injuries.
- Página 8 Maintenance Chuck Replacement • Remove the auxiliary handle and pen the chuck jaws all the way. • Using a screwdriver remove the left-threaded safety screw with a clockwise movement. • Fit the long side of an “L” Allen key (not included) in a vise and insert the short side of the “L”...
- Página 9 Notes ENGLISH...
- Página 10 Notes ENGLISH...
- Página 11 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center.
- Página 12 06060, where you can also purchase parts, components, consumables and accessories. The costs of transportation of the product that derive from its fulfillment of its service network are included. Truper will not require any proof of purchase to make the warranty effective. Phone number 800-018-7873. Made in China.