Abicor Binzel FEC Manual De Instrucciones Original página 50

9 Maintenance and cleaning
EN - 20
Place the protective underlay on the cover plate of the
3
extraction system for protection.
Loosen the mounting screws on the filter cartridge.
4
Unlock the filter cartridge by turning it clockwise.
5
Carefully pull the filter cartridge from the filter housing.
6
Place the dust collecting bag (included with the new
7
filter cartridge) over the filter cartridge as soon as the
filter cartridge protrudes a few centimeters from the
filter housing.
Close the dust collecting bag as soon as the filter
8
cartridge is completely inside.
Carefully remove the protective underlay and pack
9
and seal it in the dust collecting bag.
Dispose of both dust collecting bags in accordance
10
with local regulations.
Pull the cleaning lance all the way up so that the
11
spacer rests completely on the housing.
Insert the new filter cartridge in the tipped filter
12
housing.
Center the filter cartridge using the spacer and mount
13
it in reverse order with a tightening torque of 10 Nm.
After mounting the filter, check that the cleaning lance
14
moves freely.
FEC