Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
SPECIFICATIONS
Model
Description
Enclosure design
Loudspeaker
Rated Power (RMS)
Program Power
Power taps
Impedance
Sensitivity
Sound Pressure
Frequency response
Directivity Angle
Connection
Dimension (mm)
Weight
Finish
Color
Accessories (included)
INSTALLATION GUIDE
- Attach the L bracket to the wall. Attach the X bracket to the speaker. Join both brackets. Install the safety wire between the speaker and the wall.
- Connect the loudspeaker to the line. For 100 V lines use the bottom terminals, select the power according to terminal. For low impedance lines
use the top terminals, in this case remove the link cable between the center terminals.
LA-100T Version 1.0
LA-100T
Line Array column speaker
Bass Reflex
4 x 3"
100 W
200 W
100 W, 50 W, 25 W & 8 Ω
100 Ω, 200 Ω, 400 Ω & 8 Ω
98 dB SPL at 1 W, 1 m & 1 kHz
118 dB SPL at 100 W, 1 m & 1 kHz
150 ~ 14000 Hz (-6 dB); 80 ~ 20000Hz (-10 dB);
Horizontal 120º, vertical 20º
Block terminals
530 (Heigh) x 100 (Width) x 150 (Depth)
5.38 kg
ABS + Fiber glass
Black
Swivel bracket, 5 x M6 screws, security cable and
Allen wrench
1/1
LINE ARRAY COLUMN
WARNING:
Installation by qualified personnel only.
Speakers must be connected to the corresponding line
terminals of amplifier.
Ensure that all speakers have the same polarity with
respect to each other.
No naked flame sources, such as lighted candles,
should be placed on the apparatus
LA-100T
.
Publicidad
