Tabla de contenido
Publicidad
8. TO HEAR NEWLY ENCODED TRACK:
• P RESS FUNCTION BUTTON TO SELECT USB OR SD MODE.
• P RESS SKIP UP
ENCODED TRACK.
• T HE NEWLY ENCODED TRACK IS ALWAYS STORED AS THE LAST TRACK IN USB/
SD.
• D URING PLAYBACK FROM USB OR SD, PRESS REC BUTTON TO SWITCH BETWEEN
TRACKS ENCODED BY THIS UNIT OR OTHER TRACKS STORED IN THE USB (OR SD)
ORIGINALLY.
REMARK:
- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE
PHONO
- THE RECORDING FORMAT IS PRESET AT – MP3 BIT RATE : 128 KBPS
CASSETTE TAPE & ENCODING
1. PRESS FUNCTION BUTTON TO SELECT "TAPE" ON DISPLAY.
2. AFTER INSERTING THE CASSETTE TAPE, THE SYSTEM WILL START PLAYING
AUTOMATICALLY.
3. ADJUST THE VOLUME TO THE DESIRED LEVEL.
4. PRESS THE TAPE FAST FORWARD / EJECT" BUTTON HALF WAY DURING PLAYING,
THE TAPE WILL BE ADVANCED FORWARD RAPIDLY.
5. SLIGHTLY PRESS THE TAPE FAST FORWARD / EJECT" BUTTON AGAIN TO RESUME
NORMAL PLAYING, THE BUTTON WILL RESUME TO THE OUTERMOST POSITION.
6. PRESS THE TAPE FAST FORWARD / EJECT" BUTTON COMPLETELY, THEN THE PLAYING
WILL BE STOPPED AND THE CASSETTE TAPE WILL BE EJECTED.
REMARK: MAKE SURE THE DIRECTION IS CORRECT
WHEN INSERTING THE TAPE. TO AVOID DAMAGING
THE TAPE, IT IS HIGHLY RECOMMENDED TO TAKE
OUT THE TAPE AFTER LISTENING.
CASSETTE TAPE ENCODING
1. PRESS FUNCTION BUTTON TO SELECT "TAPE" ON DISPLAY
2. INSERT MEMORY DEVICE (USB DRIVE, SD OR MMC CARD)
3. PRESS THE REC BUTTON, THEN USB OR SD ICON WILL BE FLASHING.
BUTTON OR SKIP DOWN
I
FAST
PLAY
FORWARD
EN
BUTTON TO SELECT THE NEWLY
I
EJECT
21
Publicidad
Tabla de contenido
