Publicidad
Idiomas disponibles
Idiomas disponibles
Setup of the device
TouchKit is software, which contains of the touch panel controllers for
the specified communication connectors,RS232, PS/2 and USB, and
another
• Configuration support
The calibration
and draw test of touch panel are done by this utility.
Besides, users can add or new RS-232 touch panel device.
Follow these steps to install TouchKit.
1.Put the TouchKit CD to CD-ROM.
2.Open the Win2000_XP directory.
3.Double click the Setup.exe, then windows starts to run the
installation
4.Just click [Next>] button to continue installation.
5.Check the box if PS/2 touch controller is to be installed. The
default setting is unchecked. Then Press [Next>] to continue
installation.
11
Publicidad
