ASSEMBLY INSTRUCTIONS
4. Insert four dowels (CC) into predrilled holes
in top left and right edges of assembly. Slip top
panel (A) over dowels (CC) until snug. Secure
from beneath using bolts (AA) and washers
(BB) as shown.
5. Secure back panel support (E) using bolts
(AA) and washers (BB) from beneath and back
of assembly as shown.
6. Attach back panels (D) on left and right sides
of assembly backside using magnets along top
edge of back panel (D).
4
5
6
D
5
CC
A
BB
CC
BB
AA