Oversteel KRYPTO Serie Manual De Usuario página 10

5.Basic Operation
EN
1. Insert one end of the DisplayPort (DP) cable into your PC' s
graphics card. An HDMI cable (not included) may also be used. A
DP cable is included for your convenience.
2. Connect the other end of the cable to the corresponding
connector on your monitor.
3. Connect the power cable to your monitor, then connect the other
end to your power source. It is recommended that you use a surge
protector with adequate voltage if a wall outlet cannot be reached
directly.
4. Locate the power button on the monitor and press it to turn the
monitor on.
Adaptive-Sync
This feature is off by default. To activate, you must have hardware with Adaptive-Sync capability, a DP or HDMI cable, and the latest
graphic drivers.
After connecting your computer and monitor with a DP or HDMI cable, you may receive a prompt to enable the feature on your
computer. If you do not, you may need to enable the function in your graphics card menu. See your graphics card manufacturer's
documentation for instructions.
6. lndicator Light
Solid blue light indicates power is on and the monitor is operating nor mally. Flashing blue light indicates
no video source, no horizontal or vertical signal has been detected or voltage is low. Please ensure your
computer is on and all video cables are fully inserted and/or connected.
10
GAMING MONITOR SERIES
DP Port HDMI 2.0
Audio Out HDMI Ports
KRYPTO
HDMI 1.4
Indicator Light