Publicidad
STEP 1
1.
Screw 4 cam bolts (A) into cam bolt holes on top board (1).
2.
Attach adjustable anchor brackets (I) to top board (1) by inserting 2 screws (L) through holes
on adjustable anchor brackets (I), then tighten to top board (1).
3.
Screw 6 cam bolts (A) into cam bolt holes on left side panel (5) and right side panel (6).
STEP 2
1.
Insert 3 wood dowels (C) into wood dowel holes on right side panel (6).
2.
Attach front cross bar (4) and bottom board (3) to right side panel (6) by inserting wood
dowels (C) into wood dowel holes and inserting cam bolts (A) into cam lock holes on front
cross bar (4) and bottom board (3).
3.
Insert 3 cam locks (B) into cam lock holes on front cross bar (4) and bottom board (3), then
rotate clockwise to secure cam bolts in place.
Publicidad
