Würth 0981 180 851 Manual Del Usuario página 8

Non-stationary workplace lamp
Lamp luminous flux
Bulb luminous flux
Operating voltage
Capacity rating
Degree of protection
Protection class
Impact resistance
Housing
Cable
Cable length
Earthed power outlet or shaped solid rubber plug
Operating temperature
Dimensions (H x W x D)
Weight approx.
Φ
80,000 lm
Note
The clearance on all sides must be at least 500 mm.
Control elements
(See Fig. I)
1 Carrying handle
2 Front cover panel
3 Pin support
Matching of the lamp to the lighting
situation
You can adapt the WGL 2 to match your individual
lighting situation. The front cover panels are availa-
ble for this purpose.
a) With front cover panel
• To illuminate a close-up area.
b) Without front cover panel
• For better illumination at a distance.
8
Technical data
Art. 0981 180 851
80,000 lm
90,000 lm
100 - 240 V, 50/60 Hz
560 W
IP65
I
IK10
Impact and break-proof
Oilflex
8 m (5 m 3G1.5 mm
16 A/250 V∼, IP68
- 40°C to + 59°C
291 x 650 x 650 mm
18,000 g
CRI
70
Installation when operating with tripod/
mast system (Fig. II)
■
■
(See Fig. III)
1 Potentiometer
2 ON/OFF Push switches
The WGL 2 lamp can be controlled via the two
push switches [2] and the rotary control on the
control unit.
The control unit is integrated in the power supply
cable.
4 of the 8 Xpect 2 LED modules are switched on/off
per push switch.
Clockwise rotation of the potentiometer [1] increa-
ses the illuminance (illumination level), while antic-
lockwise rotation reduces it.
540 P yellow
®
, 3 m 7G0.75 mm
2
CCT
5000K
Operation
Connect the lamp with the pin support to the
tripod/mast.
Lock the lamp using the star knob.
Operation
)
2