Denver TCU-203 PINK Manual De Instrucciones página 3

In stop mode, press PROG. button once, the program sequence indication "P01" flashes
with "PROG" icon in the LCD at the moment. Then a flickering track number shows in the
LCD with "PROG" icon waiting for your input, select the first track to be programmed using
SKIP/SEARCH buttons or 10+ button, and press PROGRAM button again to store and
advance to the next programming step. The program sequence indication changes to "P02"
and then a flickering track number shows on the screen waiting for your next input.
Repeat the steps above to program more tracks. A maximum of 20 tracks for CD and 99
tracks for USB&MP3 can be programmed in memory in a preferred order.
Press PLAY/PAUSE button to begin programmed play in the preferred order after you are
done with programming.
You may press STOP button to terminate programmed playback. In program stop mode,
press STOP button again to clear the programming; press PLAY/PAUSE button to begin the
programmed playback with the programming order identical with the previous one done.
MP3-CD (WMA) PLAYBACK
This player is capable of MP3-CDs. It takes longer time for this player to read an MP3-CD
than it does CD-DA. Wait patiently while it is reading.
After an MP3-CD is successfully read, the total tracks number shows in the LCD. And a
second later, playback begins from the first track with the icon of "Mp3"showing on the
screen.
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY
1. Press once the SKIP/SEARCH up button in music play to skip to the next track. To skip to
a specific track ahead, press this button several times.
2. Press once the SKIP/SEARCH down button in music play to go back to the beginning of
the current track. Press the SKIP/SEARCH down button twice repeatedly to skip to the
previous track. To skip to a specific track at back, press this button several times.
3. Press 10+ button once in play to skip to the track 10 tracks ahead, twice to skip to the
track 20 tracks ahead. You can reach the last track of the disc using this button.
4. Hold the SKIP/SEARCH up button in music play to search at quick rate for a specific point
to play.
5. Hold the SKIP/SEARCH down button in music play to search at quick rate for a specific
point to play.
REPEAT A SINGLE TRACK (CD/USB/MP3)
To repeat a preferred track in playback, press MODE button once, the corresponding icon of
repeat a single track shows in the LCD. Then select the preferred track using SKIP/SERCH
buttons or 10+ button. The player will repeat the chosen track until you press STOP button.
REPEAT ALL TRACKS (CD/USB/MP3)
To repeat all tracks, press MODE button twice in play mode, the corresponding icon of
repeat all tracks shows in the LCD. The player will repeat all tracks until you press STOP
button.
4
INTRODUCTION PLAY (CD/USB/MP3)
Introduction play is that the first ten seconds of each track are played in a sequential order.
Press MODE button three times to enter this mode during play, the icon of introduction play
shows in the LCD. Press SKIP/SEARCH up button in Introduction mode to begin
Introduction play from the next track immediately after the current track. Press
SKIP/SEARCH down button in Introduction mode to begin Introduction play from the current
track again. Press STOP button to exit the introduction play mode and press PLAY/PAUSE
button to resume normal play from the first track.
RANDOM PLAY (CD/USB/MP3)
Random play is that tracks on the disc are played by the player at random. Press MODE
button four times to enter this mode during play, the icon of random play shows in the LCD.
Tracks on the disc will be selected at random for playback and the player stops
automatically after all tracks are played. You may press STOP button to exit random play
mode and press PLAY/PAUSE button to resume normal playback.
EXTERNAL MEMORY MEDIA OPERATION (USB)
Prepare the player for external memory media operation
Insert a USB data traveller into the USB port; slide the FUNCTION switch to the
CD/USB/AUX position and long press STOP/USB button to switch to USB mode. Playback
will start from the first track after reading the USB successfully.
SKIPPING TRACKS AND SEARCHING BETWEEN TRACKS
Press SKIP/SEARCH up button once to skip the current track and play the next track, press
this button continuously to go to corresponding tracks ahead;
Press once the SKIP/SEARCH down button in music play to go back to the beginning of the
current track. Press the SKIP/SEARCH down button twice repeatedly to skip to the previous
track. To skip to a specific track at back, press this button several times.
Press and hold SKIP/SEARCH buttons to initiate high-rate scanning between tracks;
release one of them to begin playback of music at normal speed.
AUXILIARY IN
Your player can be used as a power amplifier to playback the programs from portable radio,
TV set or MP3 player or whatever provided this appliance is so designed that audio signal
may be produced through a LINE-OUT jack or the like.
Observe the following steps to connect the player to another appliance:
1. Power the player on using the supplied AC Power Cord.
2. Slide Function Switch to CD/USB/AUX position.
3. Connect the appliance into the player's AUX in jack with the LINE OUT cable of the
appliance.
4. Power on the appliance and begin play.
Easy job, right? At this time you will be able to hear the sound produced from the programs
the connected appliance is broadcasting.
5