Publicidad
Idiomas disponibles
Idiomas disponibles
Control
Display functions:
1. Switching on/off: press button 1 for 3 seconds.
2. Temperature level selection/ECO mode selection: press button 2.
3. The LED lights indicate the temperature level, the ECO mode and/or any errors. They also have
the function of illuminating the inside of the fridge.
Temperature selection:
1. The device must be on to operate the display and view the set temperature.
2. Press button 1 once to exit lighting mode and enter temperature selection mode.
3. It is possible to select a temperature between 1°C and 7°C divided into four levels.
4. To select another level, press button 1 consecutively to select the following levels:
1
+7℃ ±2℃
3
+3℃ ±2℃
Wait 5 seconds to save the desired temperature after selecting it. The system will then exit temperature selection
mode and will enter lighting mode.
ECO mode:
1. ECO mode can be used to cool down fast when the (vehicle) battery is being charged (when the motor is running,
or when a battery charger is used). The device will cool down towards 1℃.
2. The mode is activated when voltage succeeds 13.5V or 25.5V for longer than 60 seconds.
3. ECO mode can be selected by pressing button 1 for more than 3 seconds.
4. The mode is deactivated when the voltage goes below 12.5V or 24.5V for longer than 60 seconds. This is usually the
case when the motor is turned off or the battery charger is deactivated. The internal temperature will go back to
the previously set temperature.
5. To deselect ECO mode, press button 1.
6. If the device is switched off or if the power is cut off when ECO mode is active, the ECO mode will be saved.
2
+5℃ ±2℃
4
+1℃ ±2℃
Publicidad
