Stealth Products UniLink Ultra Manual De Usuario página 10

Installation
Adjusting the UniLink Ultra Headrest
1
STEP
Step 2: The Occipital Pad is adjustable in
three planes.
socket head screws holding the
split ring to the pad and deflect the
pad up, down, left, right, or rotate.
Evenly tighten the four screws to
secure in the new orientation.
3
STEP
5
Occipital
Loosen the four
Sub-Occipital
Step 3:
Step 1: To adjust the UniLink links
of the
Headrest,
socket head screw at the
joint you wish to adjust
with a 4mm hex key. Move
the joint to the desired
angle, and tighten the
screw to secure it.
The sub-occipital pad is adjusted
in same fashion as the occipital
pad with one additional
adjustment available. Loosen the
two screws shown in the
illustration to the left, and the
pad can be moved forward
and backward to tailor the
fit to the client. Tighten
UniLink™
UniLink Ultra
loosen the
2
STEP
the two screws to lock
in the new fit.
EN