Publicidad
Idiomas disponibles
Idiomas disponibles
EN – Service module
4. USE
To connect the PF008 device to an M8MI Decision Support and Printer Module,
connect the USB cable of the PF008 module to one of the USB sockets located
on the rear panel of the M8MI module.
The pneumatic system consisting of the membrane pump and the air regulation
circuit, supplied as an accessory with the machine, must be connected on the
pneumatic bulkhead mounting.
To fit a product bag, connect a bottle holder, and to serve the product, please
refer to the daily operating manual provided with the machine.
A basic troubleshooting guide is also included.
9
Publicidad
