AIR BOLT VVAVACIND0378 Manual De Instrucciones página 5

the manufacturer's recommendations. These recommen-
dations can be found in the manufacturer's manual, on a
sticker on the driver's door or on the fuel tank cover.
INSTRUCTIONS FOR MEASURING THE PRESSURE OF
YOUR TYRES
It is important to check the pressure of your tyres every mon-
th. Insufficient pressure reduces the life and performance of
your tyres, increases your vehicle's fuel consumption and may
compromise your safety.
Connect the compressor's air hose to the tyre valve. The pres-
sure gauge will show the tyre pressure. It is not necessary to
connect the compressor to the 12V cigarette lighter socket to
measure the pressure.
INSTRUCTIONS FOR USING THE LED LIGHT
Connect your Air Bolt® to the 12V cigarette lighter socket in
your car.
Press the LED light ON/OFF button to switch it on
INSTRUCTIONS FOR INFLATING OTHER OBJECTS.
USING THE ADAPTERS
To use the adapters for balls, bicycles and swimming pool
accessories, simply screw the correct one onto the air hose
nozzle (Figure F).
Connect one end of the power cable to the air pump connec-
tor and the other to the 12V cigarette lighter socket in your
vehicle.
Press the ON/OFF button on your Air Bolt® to switch it on.
When the correct pressure is reached, press the ON/OFF bu-
tton on your Air Bolt® again to switch it off.
Make sure you do not over-inflate the object. Check the ins-
truction manual for the object to find out the recommended
inflation level.
Press the ON/OFF button to switch it off. Unscrew the air hose
and remove the adapter from the ball.
Your Air Bolt® includes four adapters in addition to the nozzle
on the end of the air hose. This built-in nozzle should not be
removed. It can be used to inflate car, motorcycle and bicycle
tyres (with Schrader valves).
The four additional adapters include:
- A ball adapter (Figure C)
- Two adapters with different diameters for inflatable mattres-
ses and swimming pool toys (Figure D,E)
- A bicycle adapter (for bicycles with Presta valves) (Figure B)
USES FOR THE BALL ADAPTER (Figure C)
- Basketballs
- Footballs
- American footballs
- Volleyballs
- Fitness balls
USES FOR THE INFLATABLE TOY ADAPTER (Figure D,E)
- Balloons
- Small inflatable mattresses
- Swimming pool toys
CLEANING AND MAINTENANCE
Clean your Air Bolt® with a clean, dry cloth.
Do not use cleaning products.
Before using your Air Bolt®, make sure that it is free from dust
and dirt that could prevent it from working properly.
TECHNICAL SPECIFICATIONS
Connection: 12V
socket
Pump output: max. 7 kg/cm2 or 100 PSI
Length of the connection cable: approx. 2.85 m
Length of the air hose: approx. 0.58 m
Pressure gauge: 0 - 7 kg/cm2 or 0-100 PSI
. Max. continuous operation: 10 min
Quality Warranty:
This product is covered by a warranty against manufacturing
defects subject to the time periods stipulated by the legislation
in force in each country.
This warranty does not cover damages resulting from inade-
quate use, negligent commercial use, abnormal wear and tear,
accidents or improper handling.
Australia & New Zealand only
This product has the benefit of certain Consumer Guaran-
tees. These are prescribed by the Australian Consumer Law
& the New Zealand Consumer Guarantees Act 1993 both of
which provide protection for consumers. There is no express
warranty for this product in Australia or New Zealand. The
above paragraph refers to other countries.
CAUTION:
DISPOSAL OF MATERIALS
A symbol of a crossed-out wheeled bin
should find out about and follow local regulations about
disposing of this kind of product.
Do not dispose of this product as you would other hou-
sehold waste.
Dispose of this device in accordance with the corresponding
local regulations.
Electrical and electronic devices contain hazardous substan-
ces that can have harmful effects on the environment and/or
human health and should be recycled properly.
Made in China
10 A by means of a cigarette lighter
means you