Roca A5A5279C00 Manual De Instrucciones página 22

❚
3.3 POWER CONNECTION
AC/DC ADAPTOR
Please select only one of the 2 available connection options.
❚
3.4 SYSTEM STARTUP
Once there is a power connection, please wait about 3 minutes for the Gateway to boot up
completely.
Access the setup webpage generated by the Gateway.
1. There are two ways to access:
a. Wi-Fi generated by the Gateway if it is not connected through Ethernet:
In this mode, the device it is connected to (cell phone, PC, etc.) must have Wi-Fi
connectivity:
a.1. Press button 1 of the Gateway for 3 seconds. LED 1 lights up red for a moment
and then turns green.
a.2. Search for the Wi-Fi network generated by the Gateway (Gateway_xxxxx, where
xxxxx matches the last 5 digits of the device's serial number) with the external
device. Select it and enter the password: "RocaGroup1917", impreso en su
etiqueta). Seleccionarla y entrar la contraseña "RocaGroup1917".
b. Gateway connected to Ethernet and mobile device and/or PC are connected to
the same network:
b.1. No specific action is required.
2. Find the Gateway using the device explorer. It will appear with the name CTxxxxxxxxxx,
where xxxxxxxxxx corresponds to its serial number. Access by double clicking on the
Gateway icon.
ETHERNET POE
ROUTER
ROUTER ROUTER
WITH POE
CON POE CON POE
22