Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
5. To Install Clock Batteries
Your unit is equipped with memory function to store
the time and your preset radio stations. When the
unit is in the OFF position, this memory function is
powered by two clock batteries which need to be
installed in the unit.
a. Use a No.1 Phillips screwdriver (not included)
to loosen and remove (turn counterclockwise)
the screw and the clock battery door (O).
b. Install the clock batteries (X) observing the
correct polarity (+ and –).
c. Replace the battery door, insert the screw, and
tighten it clockwise.
NOTE: When changing the clock batteries, all
settings will be erased. To avoid this, attach the battery pack or plug in the power adaptor, and
turn the unit ON before replacing the clock batteries.
NOTE: When the unit "wakes up" from standby mode, it will remember the last active operating
mode.
WARNING: When replacing clock batteries, replace them with the same or equivalent
type AAA. Observe correct polarity (+ and –) when replacing batteries. Do not store or carry
batteries in such a way that metal objects can contact exposed battery terminals.
6. Storage Pocket
The unit features left and right side storage pockets
(N) for small items.
NOTICE: To prevent accidental loss or damage,
always remove all items (if any) from the pockets
before transporting this unit.
5
+
-
X
6
11
-
+
O
Screw
N
Publicidad
