Descargar Imprimir esta página

Kobalt KJR 1040-03 Manual De Instrucciones página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS
1. To Attach Battery Pack
a. Align the mounting grooves on the battery pack
with the raised ribs in the radio's battery pack
port (P), as shown.
b. Slide the battery pack into the radio and push
the battery until you hear a "click".
NOTICE: Make sure that the battery pack is secured
to the tool before beginning operation. Improper
assembly of the battery pack can cause damage to
internal components.
To Detach Battery Pack
WARNING: Always be aware of the location
of your feet, children, or pets when pressing the battery-release button (M). NEVER re-
move the battery pack at a high position. Serious injury could result if the battery pack falls.
a. Grasp the battery pack with your hand.
b. Press the battery-release button (M) with your thumb; the battery pack will disengage from
the latch.
c. Pull the battery pack out of the battery pack port (P).
WARNING: Always remove the battery pack when the tool is not in use or when carrying
the tool at your side.
2. USB Power Ports
When a battery pack is installed or the unit is
connected to the AC power adaptor and the unit
is turned on, the USB power ports (R) and (U) will
supply charging power for low power devices such
as cell phones, MP3 players, etc. Immediately
disconnect the USB device after charging.
NOTE: The USB power ports cannot be used for
audio playback. Audio playback is only possible via
Bluetooth or AUX connection.
NOTICE: Always close the rubber cover (Q) after
each use to protect the ports from dust, dirt, and
moisture.
1
2
9
M
P
U
R
Q

Publicidad

loading

Este manual también es adecuado para:

5149482