Publicidad
Idiomas disponibles
Idiomas disponibles
Setting Up the Camera
Camera Installation
Connect the baby camera's Micro USB power cable to the camera
adapter (5V 2A), and then connect the adapter to a power outlet.
Finally, connect the other end of the baby camera's micro USB
power cable to the micro USB port in the camera.
Adding a new Baby Camera to the Baby Monitor
1. Check the firmware version of the monitor (see image
below), to make sure your SpaceView Baby Monitor is
running firmware version v2.3.0 or above. Contact our
customer service team for the latest firmware updates at:
support@eufylife.com
04 English
2. Enter menu settings, go to Camera -> Add Camera, then
follow onscreen instructions to start the pairing.
3. Press and hold the pairing button on the rear of the
camera for 1 second until a notification prompt is heard.
English 05
Publicidad
