Descargar Imprimir esta página

SOLAC Turbobat Power Instrucciones De Uso página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
Downloaded by: pd-oliana on 12-09-2022 12:50 CEST
instructions, in reverse order.
OUTLET FILTER: (FIG.4)
- Press the button to open the outlet filter lid (G)
and pull out the filter from the anchorage
- Wash the filter and let it air dry.
CLEANING THE ROTARY BRUSH:
- To remove the brush:
- At the bottom of the brush, move the tab located
at the bottom of the brush towards the open
padlock to disengage the roller and pull to remo-
ve it. (Fig. 5).
- Remove the brush and clean.
- To reassemble, follow the above instructions but
in reverse.
SUPPLIES:
- Supplies can be acquired from distributors and
authorised establishments (such as filters, shoe
brush and battery set) for your appliance model.
- Always use original supplies, designed specifi-
cally for your appliance model.
- These supplies are available in specialist shops.
HOW TO REMOVE THE BATTERIES FROM
THE DEVICE:
- CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
- CAUTION: the appliance must be disconnec-
ted from the supply mains when removing the
batteries.
To remove the batteries, once the life of the
appliance, proceed as follows:
- Remove the battery from the product by pres-
sing the battery removal button (N) and pulling
it out. (Fig.6)

Publicidad

loading