Publicidad
SAFETY INSTRUCTION
READ THESE INSTRUCTIONS CAREFULL Y AND
KEEP THEMFOR FUTURE CONSUL T A TION.
W ARNING:TO REDUCETHE POSSIBLE RISH OF
FIRE.ELECTRICAL DISCHARGES OR PERSIONAL
INJURY,T AKETHE FOLLOWING INTO ACCOUNT:
1. Proceed with care. Read the instructions in full
before starting the installation.
2. W ARNING! This fan can only be used with a
bipolar switch with a contact opening of 3mm.
3. The installation process must only be carried
out by an authorized electrician.
4. The installation height, i.e. the distance
between the blades and the floor, should be at
least 2.3 meters.
5. Make sure there are no obstacles within the
area of rotation.
6. Make sure the fan is securely attached to
the ceiling.
7. WARNING! Do not use a switch with a voltage
regulator to control the speed of the fan.
8. WARNING! T o avoid damage, make sure that
the blades are not bent over and that there are
no foreign objects within the area of rotation.
9. WARNING! If the fan is installed close to the
ceiling, the ceiling may not be lowered using rails
in accordance with European safety regulations.
This could cause serious injuries. If you have any
doubts in relation to these essential safety
requirements, consult local by -laws.
Publicidad
