Publicidad
Idiomas disponibles
Idiomas disponibles
1. Remove taillights - Open tailgate. Remove plastic cover near taillight, using a phillips head screwdriver, remove (2) push-pin rivets holding cover to taillight housing,
both sides. Using a 10mm socket, remove (2) screws from taillight and remove taillight by gently pulling rearward. Disconnect the wiring and set taillight aside, both
sides.
2a. Remove fascia - Note: If the vehicle has mud flaps, remove them first by using an 8mm socket to remove the two bolts and a flathead screwdriver to remove the
two push fasteners. Set aside for reinstallation. a.) Using a flat head screw driver, remove (7) plastic fasteners from the bottom of the fascia.
©2022 Horizon Global™ Corp - Printed in Mexico
Sheet 5 of 27
76597NP
6/15/22
Rev. A
Publicidad
