ENGLISH
being sucked into the appliance, including metal parts,
hairspray and hair. No parts need to be lubricated. The
motor is equipped with self-lubricating bushings / bearin-
gs for a long life.
Cleaning & maintenance
Importante: To maintain the validity of the warran-
ty, the filter of your hairdryer must always be kept
clean. It is recommended to clean the filter at least
once a week. Cleaning must be done with the appliance
switched off and disconnected from the power supply.
To clean the filter, unscrew the rear external filter, remo-
ve the sponge filter inside and wash it also using warm
water. Make sure that dust, hair and any other dirt is
completely removed from the sponge filter.
Make sure that the sponge is completely dry before rein-
serting it in the filter holder and close it again by screwing
the external filter in the opposite direction.
Two additional spare filters are supplied with the device.
It is recommended to replace the sponge filter every time
it is damaged, has lost its initial features
(for example if it tends to crumble) or if the
dirt is not easy to remove by cleaning with
warm water. Discover how to clean the fil-
ter through this QR code: