Probuilder 43628 Manual De Instrucciones página 29

1 1
9 9
Main components
1. Self-tightening drill chuck
2. Depth stop
3. Drill/hammer drill selector
4. Handle
5. Lock button
6. Cord and plug
7. On/off button
8. Toggle switch, reversible drive
9. Support grip
3 3
2
8 8
Preparation
Adjusting the support grip
The support grip (9) can be rotated 360°
around the � ange at the front of the
hammer drill, e.g. vertically under the tool
or horizontal out to either side, for the best
possible support.
Twist the bottom of the support grip to
loosen it and push it past the chuck and over
the � ange on the hammer drill. Turn the
handle to the desired position and tighten it
again.
7 7
4 4
5 5
6 6
29
GB