TrolMaster Tent-X TCS-1 Manual De Instrucciones página 2

FOREWORD
Congratulations on purchasing the all in 1, state-of-the-art control
system, the Tent-X (TCS-1). Designed for single-zone grow tents, this
device is capable of satisfying all your grow tent's environmental and
irrigation needs. The Tent-X is the brain that unites all your climate control
devices into one being, allowing your devices to work together in order to
create the optimal growth environment for your plants.
PACKAGE CONTENTS
• Tent-X Controller
• Backplate(Bracket)
• 4ft RJ12 Cable
• Y-Shaped splitter
INSTRUCTIONS
Install the Tent-X on a wall using the included back plate (bracket). Install
the MBS-TH sensor by plugging the sensor using the RJ12 cable attached
to the MBS-TH, into the sensor port on the Tent-X. Make sure that the
sensor is properly placed in the tent, perpendicular to the plants and the
grow lights. The MBS-TH is a 3-in-1 sensor that can detect temperature,
humidity, and light. In order to detect the PPFD levels of the light being
emitted, the MBS-PAR sensor has to be purchased separately.
It is recommended to install the controller in a clean and dry environment.
Do not allow the Tent-X to be exposed to water or excessive heat. Do not
open or attempt to open the Tent-X to repair or disassemble the ontroller,
as there are no user-serviceable parts inside. Opening the controller will
void the warranty. If you'd like to clean the surface of the controller, wipe
it with a damp cloth. The Tent-X operates under natural ventilation
conditions and is suitable to receive power from a conventional household
outlet.
02
• 12DC Power supply
• 3-in-1 MBS-TH sensor
• 16ft RJ12 Cable
BUTTONS ON THE TENT-X CONTROLLER
There are 6 buttons used for navigation on the controller:
Up/Down: Use UP or DOWN button to navigate upwards or downwards
for any item on the LCD screen.
Left/Right: The LEFT and RIGHT buttons can either be used to navigate
across different pages or to select an item on the lcd screen
Enter: The ENTER button is used to open settings menu and to confirm
any selection that you've made.
Back: The BACK button is used to navigate back to previous pages.
UP DOWN LEFT RIGHT ENTER BACK
03