Descargar Imprimir esta página
Ocultar thumbs Ver también para TCS-1:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Enlaces rápidos

Tent-X (TCS-1) User Manual
TCS-1
for Tent-X Control System
OVERVIEW
Congratulations on purchasing the all in 1, state-of-the-art control system, the Tent-X. Designed for
single-zone grow tents, this device is capable of satisfying all your grow tent' s environmental and irrigation
needs. The TCS-1 / Tent-X is the brain that unites all your climate control and irrigation devices into one
controller. This allows ALL of your devices to work together in order to create the optimal growth
environment for your plants. The TENT-X allows users to monitor and control both their environment and the
irrigation / fertigation systems within their grow tent, using one simple-to-use and cost-effective controller.
The Tent-X is suitable to control all sizes of grow tents. It can control and monitor EC type fans, air
temperature, humidity, CO2 and Lights. It can also monitor and control all of your irrigation devices within
your tent including pH, EC, water temperature, and VWC (Volumetric Water Content).
PACKAGE CONTENTS
The TCS-1 controller comes with the main controller, a MBS-TH sensor, a 12vdc power supply and a
standard cable kit with a 4 & 16ft RJ cable and Y-splitter. The other parts that will make up your control
system will be purchased separately as required by each user.
01

Publicidad

loading

Resumen de contenidos para TrolMaster TCS-1

  • Página 1 The TCS-1 / Tent-X is the brain that unites all your climate control and irrigation devices into one controller. This allows ALL of your devices to work together in order to create the optimal growth environment for your plants.
  • Página 2 First, connect an RJ12 cable to the port, then connect the other end to either a Y-splitter or TrolMaster’ s splitter hub (SPH-1). If using the Y-splitter, you can connect the first sensor and then use additional Y-splitters to add each additional sensor.
  • Página 3 Water content sensor or WCS-2: Water content + EC sensor Once the sensors are all connected to the SENSOR port on the TCS-1, some of the sensors require you to press the small button on the sensors to link or “address” each sensor to the TCS-1 controller. The TENT-X controller will then automatically assign an address to the sensors sequentially.
  • Página 4 Keep in mind the maximum number of each device module that can be connected as stated above. 4. EC Fans Connections The TCS-1 can control EC fans. We will divide those fans into two categories, standard EC fans and Aerofan EC fans.
  • Página 5 TCS-1 controller. So the simplest way to connect Aerofan fans to the TCS-1 is to plug in the communication cable from the fan(s) directly into the DEVICE port on the TCS-1. All of the fans to be controlled would be daisy-chained together using the provided cables and then connected to the device port on the TCS-1.
  • Página 6 *Note: There is no built-in wifi on the TCS-1. Contact TrolMaster Tech Support for options related to using a wifi connection as most commercially available wifi range extenders (with Ethernet ports) are NOT compatible with TrolMaster controllers. DOWN LEFT RIGHT...
  • Página 7 Understanding The Menu / Pages There are 4 Main menu pages on the TCS-1. When you first power on the controller, the Home page will be shown. On that page you can see the current environmental conditions inside the tent. Pressing the right arrow button will bring you to the current irrigation conditions.
  • Página 8 The Tent-X controller will handle the rest once you've set up your preferred irrigation schedule. Your timer-controlled devices will be controlled automatically with the TCS-1 according to the settings you specified. EC Fan Settings...
  • Página 9 0% will allow the user to ensure negative pressure inside the tent even when the TCS-1 is not calling for cooling. Setting the maximum speed the fan can operate will allow the user to choose how fast and how loud the fan will operate at full speed.
  • Página 10 firmware to a MicroSD card that is 32 gb or less. To update the firmware, insert the MicroSD card in the TCS-1 slot then go to the System Settings page and choose system reset. At the bottom you will see the current Firmware version that is installed.
  • Página 11 SPFCIFICATIONS Input Voltage: 100-240VAC, 50/60Hz Humidity Accuracy: ±7% Degree of Ingress Protection: IP20 Humidity Deadband: 5% Max Distance to Device to be Connected: 1000 Meters CO2 Range: 0~2000 PPM Temperature Range: 32~138°F CO2 Accuracy: ±50 PPM Temperature Accuracy: ±1°F CO2 Deadband: 50 PPM Temperature Deadband: 3°F Working Temperature: 32~122°F Humidity Range: 5~95%...
  • Página 12 Einzonen-Growzelte entwickelt und ist in der Lage, alle Umwelt- und Bewässerungsanforderungen Ihres Growzeltes zu erfüllen. Der TCS-1 / Tent-X ist das Gehirn, das alle Ihre Klima- und Bewässerungsgeräte in einem Controller vereint. Dadurch können ALLE Ihre Geräte zusammenarbeiten, um die optimale Wachstums Umgebung für Ihre Pflanzen zu schaffen.
  • Página 13 Die miteinander verbundenen RJ12-Kommunikationskabel sind in verschiedenen Längen erhältlich. Es ist wichtig, die richtige Länge zu wählen, die zu Ihrer Anwendung passt. Beim Kauf des TCS-1 TENT-X-Steuerungssystems erhalten Sie im Lieferumfang ein RJ12-Kabelset bestehend aus einem 4 Fuß und 16 Fuß langen RJ-Kabel und einem Y-Splitter.
  • Página 14 Benutzer führt im System Einstellungsmenü einen Werks- oder Sensor-Reset durch. 2. Lichtverbindungen Der TCS-1 kann die meisten Marken von LED- oder HID-Leuchten steuern, indem er die beiden integrierten Beleuchtungssteuerkanäle des TCS-1 verwendet. Jeder der beiden Kanäle kann unabhängig voneinander betrieben werden, sodass zwei verschiedene Arten oder Marken von Leuchten gesteuert werden können.
  • Página 15 Nachfolgend finden Sie eine Liste aller Geräte Module, die mit dem TCS-1 verwendet werden können. 2 x DSC-1: Gerätestation für CO2 2 x DSH-1&2: Gerätestation für Feuchte 2 x DST-1&2: Gerätestation für Temperatur 2 x DSP-1&2: Gerätestation zur Motorsteuerung Trockenkontakt-Gerätestation mit Schließer- und Öffnerkontakten.
  • Página 16 FRC-1 durch Drehen des manuellen Knopfs am FRC-1 vorübergehend die Lüftergeschwindigkeit, basierend auf der manuellen Geschwindigkeitseinstellung des Benutzers steuern. Nach 30 Minuten Inaktivität auf dem FRC-1 werden die Aerofans, die mit dem FRC-1 und dem TCS-1 verbunden sind, wieder vom TCS-1 gesteuert.
  • Página 17 App zugreifen. *Hinweis: Der TCS-1 verfügt über kein integriertes WLAN. Wenden Sie sich für Optionen im Zusammenhang mit der Verwendung einer WLAN-Verbindung an den technischen Support von TrolMaster, da die meisten im Handel erhältlichen WLAN-Repeater (mit Ethernet-Anschlüssen) NICHT mit TrolMaster-Controllern kompatibel sind.
  • Página 18 Das Menü/die Seiten verstehen Es gibt 4 Hauptmenü Seiten auf dem TCS-1. Wenn Sie den Controller zum ersten Mal einschalten, wird die Startseite angezeigt. Auf dieser Seite können Sie die aktuellen Umgebungsbedingungen im Zelt sehen. Durch Drücken der rechten Pfeiltaste gelangen Sie zu den aktuellen Bewässerung Bedingungen. Sie können auch die linke Pfeiltaste verwenden, um den Gerätestatus und die Alarmmeldung Seiten anzuzeigen.
  • Página 19 Wiederholungszyklus beginnen soll, und festlegen, wie viele Zyklen wiederholt werden, bevor die Timer bis zum nächsten Tag abgeschaltet werden. Der Tent-X-Controller erledigt den Rest, sobald Sie Ihren bevorzugten Bewässerungsplan eingerichtet haben. Ihre timer gesteuerten Geräte werden mit dem TCS-1 automatisch entsprechend den von Ihnen festgelegten Einstellungen gesteuert.
  • Página 20 Abluftventilator verwenden, können Sie durch Einstellen der Mindestgeschwindigkeit des Ventilators auf über 0 % einen Unterdruck im Zelt gewährleisten, auch wenn der TCS-1 keine Kühlung benötigt. Durch Einstellen der maximalen Geschwindigkeit, mit der der Lüfter betrieben werden kann, kann der Benutzer auswählen, wie schnell und wie laut der Lüfter bei voller Geschwindigkeit arbeiten soll.
  • Página 21 Benutzer NUR die Adressierung des Gerätemodus zurücksetzen. Der Werksreset kann verwendet werden, um einige größere Probleme innerhalb des Controllers zu beheben oder wenn der Benutzer das Gerät einfach auf die Werkseinstellungen zurücksetzen möchte. Sie können die interne Firmware des TCS-1 auch aktualisieren, indem Sie Firmware-Update auswählen.
  • Página 22 MicroSD-Karte mit 32 GB oder weniger. Um die Firmware zu aktualisieren, stecken Sie die MicroSD-Karte in den TCS-1-Steckplatz, gehen Sie dann zur Seite „Systemeinstellungen “ und wählen Sie „System zurücksetzen “. Unten sehen Sie die aktuell installierte Firmware-Version. Um das Update zu installieren, wählen Sie „Firmware-Update “...
  • Página 23 Le TCS-1 / Tent-X est le cerveau qui réunit tous vos appareils de climatisation et d'irrigation en un seul contrôleur. Cela permet à TOUS vos appareils de fonctionner ensemble afin de créer l'environnement de croissance optimal pour vos plantes.
  • Página 24 Les câbles de communication RJ12 d'interconnexion sont disponibles en différentes longueurs. Il est crucial de choisir la bonne longueur adaptée à votre application. Lors de l'achat du système de contrôle TCS-1 TENT-X, vous recevrez un jeu de câbles RJ12 composé d'un câble RJ de 4 pieds et 16 pieds et d'un répartiteur en Y dans le cadre de l'emballage.
  • Página 25 2. Connexions lumineuses Le TCS-1 peut contrôler la plupart des marques de lumières LED ou HID à l'aide des deux canaux de contrôle d'éclairage intégrés au TCS-1. Chacun des deux canaux peut fonctionner indépendamment l’ un de l’...
  • Página 26 à plus de 0 % permettra à l'utilisateur d'assurer une pression négative à l'intérieur de la tente même lorsque le TCS-1 ne demande pas de refroidissement. Le réglage de la vitesse maximale à laquelle le ventilateur peut fonctionner permettra à l'utilisateur de choisir la vitesse et le volume sonore du ventilateur à...
  • Página 27 2. Collegamenti luminosi Il TCS-1 può controllare la maggior parte delle marche di luci LED o HID utilizzando i due canali di controllo dell'illuminazione integrati sul TCS-1. Ciascuno dei due canali può funzionare indipendentemente l'uno dall'altro per consentire il controllo di due diversi tipi o marche di luci.
  • Página 28 Vous trouverez ci-dessous une liste de tous les modules de périphérique pouvant être utilisés avec le TCS-1. 2 x DSC-1 : Station d'appareil pour CO2 2 x DSH-1&2 : Station d'appareil pour l'humidité 2 x DST-1&2 : Station d'appareil pour la température 2 x DSP -1&2 :...
  • Página 29 être utilisée pour résoudre certains problèmes majeurs au sein du contrôleur, ou si l'utilisateur souhaite simplement rétablir les paramètres d'usine de l'unité. Vous pouvez également mettre à jour le micrologiciel interne du TCS-1 en sélectionnant Mise à jour du micrologiciel. Calibrage : Vous pouvez calibrer les différents capteurs que vous utilisez à...
  • Página 30 Di seguito è riportato un elenco di tutti i moduli del dispositivo che possono essere utilizzati con il TCS-1. 2 x DSC-1: stazione del dispositivo per CO2 2 x DSH-1&2: Stazione del dispositivo per l'umidità 2 x DST-1&2: Stazione del dispositivo per la temperatura 2 x DSP -1&2:...
  • Página 31 Les Aerofans ne nécessitent aucun type d'adaptateur pour les contrôler à l'aide du contrôleur TCS-1. Ainsi, le moyen le plus simple de connecter les ventilateurs Aerofan au TCS-1 est de brancher le câble de communication du ou des ventilateurs directement sur le port DEVICE du TCS-1. Tous les ventilateurs à...
  • Página 32 *Remarque : il n'y a pas de wifi intégré sur le TCS-1. Contactez le support technique TrolMaster pour les options liées à l'utilisation d'une connexion Wi-Fi, car la plupart des prolongateurs de portée Wi-Fi disponibles dans le commerce (avec ports Ethernet) ne sont PAS compatibles avec les contrôleurs TrolMaster.
  • Página 33 Comprendre le menu/les pages Il y a 4 pages de menu principal sur le TCS-1. Lorsque vous allumez le contrôleur pour la première fois, la page d'accueil s'affichera. Sur cette page, vous pouvez voir les conditions environnementales actuelles à...
  • Página 34 Le contrôleur Tent-X s'occupera du reste une fois que vous aurez configuré votre programme d'irrigation préféré. Vos appareils contrôlés par minuterie seront contrôlés automatiquement avec le TCS-1 selon les paramètres que vous avez spécifiés.
  • Página 35 MicroSD de 32 Go ou moins. Pour mettre à jour le firmware, insérez la carte MicroSD dans l'emplacement TCS-1 puis accédez à la page Paramètres système et choisissez réinitialisation du système. En bas, vous verrez la version actuelle du micrologiciel installé. Pour installer la mise à jour, choisissez Mise à jour du micrologiciel et suivez les invites pour sélectionner le fichier vers lequel mettre à...
  • Página 36 Important! Ne laissez pas la Tent-X être exposée à l’ eau ou à une chaleur excessive. N'ouvrez pas ou n'essayez pas d'ouvrir le Tent-X pour réparer ou démonter le contrôleur, car il n'y a aucune pièce réparable par l'utilisateur à l'intérieur. L'ouverture du contrôleur annulera la garantie.
  • Página 37 è in grado di soddisfare tutte le esigenze ambientali e di irrigazione della tua tenda da coltivazione. TCS-1 / Tent-X è il cervello che unisce tutti i tuoi dispositivi di climatizzazione e irrigazione in un unico controller. Ciò consente a TUTTI i tuoi dispositivi di lavorare insieme per creare l'ambiente di crescita ottimale per le tue piante.
  • Página 38 SPH-1 a 8 porte anziché più ripartitori a Y. Di seguito sono riportati tutti i tipi di sensori che possono essere collegati al TCS-1 e il numero massimo che può essere collegato.
  • Página 39 L'FRC-1 è collegato in linea alle ventole utilizzando il cavo a Y in dotazione, l'altra estremità del cavo a Y si collega al TCS-1. Normalmente il TCS-1 controlla la velocità della ventola in base all'impostazione dell'utente all'interno del TCS-1. Ma quando l'FRC-1 è collegato, ruotando la manopola manuale sull'FRC-1 si consentirà...
  • Página 40 TCS-1 non è presente alcuna connessione Wi-Fi integrata. Contatta il supporto tecnico TrolMaster per le opzioni relative all'utilizzo di una connessione Wi-Fi poiché la maggior parte degli estensori di portata Wi-Fi disponibili in commercio (con porte Ethernet) NON sono compatibili con i controller TrolMaster.
  • Página 41 Comprendere il menu/le pagine Ci sono 4 pagine del menu principale sul TCS-1. Quando si accende il controller per la prima volta, verrà visualizzata la pagina Home. In quella pagina puoi vedere le attuali condizioni ambientali all'interno della tenda.
  • Página 42 fino al giorno successivo. Il controller Tent-X gestirà il resto una volta impostato il programma di irrigazione preferito. I tuoi dispositivi controllati dal timer verranno controllati automaticamente con il TCS-1 in base alle impostazioni specificate.
  • Página 43 0% consentirà all'utente di garantire una pressione negativa all'interno della tenda anche quando il TCS-1 non richiede raffreddamento. L'impostazione della velocità massima di funzionamento della ventola consentirà all'utente di scegliere la velocità e il volume con cui la ventola funzionerà...
  • Página 44 Il ripristino delle impostazioni di fabbrica può essere utilizzato per risolvere alcuni problemi importanti all'interno del controller o se l'utente desidera semplicemente riportare l'unità alle impostazioni di fabbrica. È inoltre possibile aggiornare il firmware interno del TCS-1 selezionando Aggiornamento firmware. Calibrazione: puoi calibrare i vari sensori che stai utilizzando all'interno della tenda di coltivazione selezionando la pagina Calibrazione.
  • Página 45 firmware. Quindi salverai e copierai il firmware più recente su una scheda MicroSD da 32 GB o meno. Per aggiornare il firmware, inserire la scheda MicroSD nello slot TCS-1, quindi andare alla pagina Impostazioni di sistema e scegliere Ripristino del sistema. In basso vedrai la versione attuale del firmware installato. Per installare l'aggiornamento, scegli Aggiornamento firmware e segui le istruzioni per selezionare il file da...
  • Página 46 Importante! Non consentire che Tent-X venga esposto all'acqua o al calore eccessivo. Non aprire o tentare di aprire il Tent-X per riparare o smontare il controller, poiché al suo interno non sono presenti parti riparabili dall'utente. L'apertura del controller annullerà la garanzia. Se desideri pulire la superficie del controller, strofinala con un panno umido. La Tenda-X funziona in condizioni di ventilazione naturale ed è...
  • Página 47 El TCS-1 / Tent-X es el cerebro que une todos sus dispositivos de riego y control de clima en un solo controlador. Esto permite que TODOS sus dispositivos funcionen juntos para crear el entorno de crecimiento óptimo para sus plantas.
  • Página 48 Primero, conecte un cable RJ12 al puerto, luego conecte el otro extremo a un divisor en Y o al concentrador divisor de TrolMaster (SPH-1). Si usa el divisor en Y, puede conectar el primer sensor y luego usar divisores en Y adicionales para agregar cada sensor adicional.
  • Página 49 2. Conexiones de luz El TCS-1 puede controlar la mayoría de las marcas de luces LED o HID utilizando los dos canales de control d e i l u m i n a c i ó n i n t e g r a d o s e n e l TC S - 1 . C a d a u n o d e l o s d o s c a n a l e s p u e d e f u n c i o n a r d e f o r m a independiente para permitir controlar dos tipos o marcas diferentes de luces.
  • Página 50 A continuación se muestra una lista de todos los módulos de dispositivos que se pueden utilizar con el TCS-1. 2 x DSC-1 : Estación de dispositivos para CO2 2 x DSH-1&2 : Estación de dispositivos para humedad 2 x DST-1&2 : Estación de dispositivos para temperatura...
  • Página 51 Los ventiladores EC de la marca Aerofan no requieren el EFC-1 opcional, ya que se pueden conectar directamente al puerto RJ12 del módulo de dispositivo en el TCS-1. El TCS-1 puede controlar un solo Aerofan o varios Aerofans utilizando la misma configuración de usuario para todos los ventiladores conectados.
  • Página 52 0% permitirá al usuario garantizar una presión negativa dentro de la tienda incluso cuando el TCS-1 no requiere enfriamiento. Establecer la velocidad máxima a la que puede funcionar el ventilador permitirá al usuario elegir qué tan rápido y con qué volumen funcionará el ventilador a máxima velocidad.
  • Página 53 También puede actualizar el firmware interno del TCS-1 seleccionando Actualización de firmware. Calibración: Puede calibrar los distintos sensores que está...
  • Página 54 firmware más reciente en una tarjeta MicroSD de 32 GB o menos. Para actualizar el firmware, inserte la tarjeta MicroSD en la ranura TCS-1, luego vaya a la página Configuración del sistema y elija restablecer el sistema. En la parte inferior verá la versión actual del firmware que está instalada. Para instalar la actualización, elija Actualización de firmware y siga las instrucciones para seleccionar el archivo...
  • Página 55 ¡Importante! No permita que Tent-X quede expuesto al agua o al calor excesivo. No abra ni intente abrir el Tent-X para reparar o desmontar el controlador, ya que en su interior no hay piezas que el usuario pueda reparar. Abrir el controlador anulará...
  • Página 56 útiles en la aplicación. *Nota: No hay wifi incorporado en el TCS-1. Comuníquese con el soporte técnico de TrolMaster para conocer las opciones relacionadas con el uso de una conexión wifi, ya que la mayoría de los extensores de rango wifi...
  • Página 57 Comprender el menú/las páginas Hay 4 páginas del menú principal en el TCS-1. Cuando encienda el controlador por primera vez, se mostrará la página de inicio. En esa página puedes ver las condiciones ambientales actuales dentro de la tienda. Al presionar el botón de flecha derecha accederá...
  • Página 58 . S u s d i s p o s i t i v o s c o n t r o l a d o s p o r t e m p o r i z a d o r s e c o n t r o l a r á n automáticamente con el TCS-1 de acuerdo con la configuración que haya especificado.