Quick start guide:
Unpack your Tangent fjord
Switch the ON/OFF at the bottom to ON, for activating the touch sensor at
the top of the unit.
Power the unit ON by using a short press at the touch sensor
The unit will now go into pairing mode and you can find it at your smart
phone.
("If your smart phone has NFC and it is enabled you can use that for
pairing" NFC is located at the top of the unit.)
You are now connected with your device and can play music.
For power OFF the fjord mini, you must use a long press at the touch
sensor.
Charge your Tangent fjord when needed.
Touch key functions:
Turn on
Turn off
Volume up
Volume down
Cancel pairing list
Answer call
Reject call
End call
Accept call waiting
LED :
White
White flashing
Red
Red flashing
Tangent_fjord_mini_manual-draft-2.indd 12
Short press
Long press
(in operating mode and pairing mode)
Slow press (tap x 1) when playing music
Fast press (multiple tapping) when playing music
Double press in pairing mode
Short press when incoming call
Long press when incoming call
Short press when calling
Double press when call waiting
Power
BT pairing
Charge indication (OFF when charge is over)
Battery is low
01-06-2015 14:24:48