Solvis SolvisMax Futur Instrucciones De Montage página 12

SolvisMax Futur / SolvisMax Solo – Installation
5. Mounting the console plate
• Install the console plate on the console and screw on
each one with two M6 nuts and washers as shown.
Futur
Continue with step 5 on page 13 in the Solvis-
Integral installation instructions.
Please return to these instructions for installa-
tion of the storage tank insulation (Assembly
of the unit (part 2)).
Solo
6. Piping for heating, solar and emptying
• Lead the connections outside the solar station using
the corrugated pipes (Gaskets -> Assembly pack).
• On site, lead the connections further with press fittings.
• For the storage tank output "Solar R, Fill./Em.", the cus-
tomer must make both connections using a T-piece for
solar return and filling/emptying.
• Install round floor plate and insulation wedge.
Continue with step 8 on page 14 in the Solvis-
Integral installation instructions.
Please return to these instructions for installa-
tion of the storage tank insulation (Assembly
of the unit (part 2)).
12
Mounted console plate
SolvisSolo:
1. Solar R
Heat. F
Hzg. VL 1. Solar RL
2. Fill/Em.
2. Bef./Ent.
Heat. R
Hzg. RL
M 30-M – Subject to technical changes 05.07
Solar F
Solar VL