Permissions / Passwords - Franke ZA3OP0022 Instrucciones De Montaje Y Uso

13. Permissions / Passwords

Permission Level
Different permission levels are available for viewing and changing operating
parameters within the multi-function power supply control:
Staff Level
Technician Level
Entering passwords (PIN)
PIN
0 0 0 0 0
☞
When the PIN has been entered successfully the display will show the main menu.
When a wrong number is confirmed with the enter key, the display will remain in
the 'Enter PIN:' status.
Resetting a Permission Level
The permission level must be reset when, for example, the control system must be
immediately protected against unauthorized use after service work was done in the
Technician Level.
☞
If no entries are made in the control panel for more than 4 min., the permission level
is automatically reset.
No password needed, just for viewing some
parameters
Customer/Operator password - Changing all
permissions, saving, etc.
The password consist of a 5-digit numerical code.
13.1 Press key
13.2 Use keys
required digit.
13.3 Use key
location.
- 12 -
.
and to enter the
to jump to the next