Publicidad
Idiomas disponibles
Idiomas disponibles
Black
Troubleshooting
State
The dust sensor
light turns yellow
➡
or red even when
the cleaner is not
sucking dust
➡
The dust sensor
light does not turn
yellow or green
➡
The sensor light
does not turn red
Suction power
remains the same
➡
even after the
color of the dust
sensor light has
changed
The soft roller
➡
brush stops
operating
The main unit and
➡
charging adapter
become warm
during battery
charging
The main unit
➡
becomes warm
while the cleaner
is operating
The dust cup
➡
cannot be
attached
If you cannot resolve the problem after implementing the above actions;
Please contact the store where the product was purchased from or the Iris Call Center.
IRIS OHYAMA EUROPE Customer Service E-mail
CustomerService@iriseurope.fr
● Do not try to disassemble, repair or modify the cleaner yourself.
(continued)
Causes
● The dust sensor is stained
● The cleaner is used on a carpet or
bedding
● If the cleaner is used without the
head or nozzle, the dust sensor
may be interrupted by natural
light, causing a malfunction of the
cleaner
● The cleaner works in the normal
mode or turbo mode
● Dust or a string has wound around
the rotating unit, or the rotating unit
is clogged
● The battery or circuit generates a
little heat because the charging
current is flowing
● The main unit becomes a little
warm due to the heating of the
battery and motor
● The recessed part on the bottom of
the dust cup does not fit onto the
hook
Measures
➡
● Clean the dust sensor.
➡
● The sensor may continuously turn red because it
senses loose hair and house dust inside the cleaner.
➡
● Attach the floor head or the attachment supplied
before operating.
● In the normal mode or turbo mode, the cleaner keeps
➡
operating in the selected mode regardless of the
color of the dust sensor light. To change the suction
power in conjunction with the light color, operate the
cleaner in the AUTO mode.
➡
● Clean the floor head.
➡
● This is not an error.
➡
● This is not an error.
● Press down the upper side of the dust cup after
➡
ensuring that the recessed part on the bottom of the
dust cup is attached to the hook.
18
EN
SCD-130P
(→
)
P12
(→
)
P9
(→P12)
(→
)
P11
Publicidad
