Publicidad
E N G L I S H
Power Bank
POWER SUPPLY
This product is powered by a built-in lithium battery that
can be charged with the USB-microUSB cable included
in the box. To charge the battery, insert one end of the
Phone Charger
cable into the DC 5V socket
USB socket:
- of a 100-240Vac Mains power supply unit that has an
output with the following characteristics: Vdc=5V
PC/Laptop
I=500mA; - a PC; - a Power bank.
d
Whilst charging, LED
remains on and will turn off once
fully charged.
Power Bank Phone Charger PC/Laptop
Using the USB-microUSB cable
WARNING: The transformer, power supply used with the electric toy shall be
regularly examined for damage to the supply cord, plug, enclosure or other parts,
and in the event of damage, it shall not be used until the damage has been repaired.
• the transformer or power supply is not a toy • Make sure the toy is disconnected
from the power supply unit before cleaning it • the toy shall only be used with a
transformer for toys or a power supply for toys.
This toy is only to be connected to equipment bearing either
of the following symbols:
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below,
please refer to Council Administration office regarding specialised waste
collection centres.
1. BATTERY DISPOSAL: At the end of the service life of the
product, the battery contained in it must be disposed of separate
from general undifferentiated waste.
2. PACKAGING DISPOSAL: Take the paper, cardboard and
corrugated board to the appropriate waste collection centres.
Plastic material must be placed in the relevant collection
containers.
The symbols indicating the various types of plastic are:
01
02
03
PET
PE
PVC
Key for the different types of plastic materials:
PET= Polyethylene terephtalate • PE= Polyethylene, code 02 for PE-HD, 04
for PE-LD • PVC =Polyvinyl chloride • PP= Polypropylene • PS= Polystyrene,
Polystyrene foam • O= Other polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES: The wheelie bin
symbol with a cross indicates that the product must not be
disposed of in the domestic waste at the end of its useful life.
Instead, it should be taken to your nearest designated collection
point or recycling facility. Alternatively, check with your retailer
and return the product when buying a replacement, on a one-to-one basis or
as free of charge in case the size is smaller than 25 cm. Appropriate disposal
promotes the recycling of parts and materials, as well as helping to protect
the environment and human health. Under current legislation, strict
penalties are enforced against those disposing of products illegally. For more
information about the collection of special waste, contact your Local
Authority.
g
and the other end into the
Li-ion
Li-ion
05
06
07
PP
PS
O
SWITCHING ON/OFF
To switch on the instrument move selector
switch off move the same selector to OFF. The LED
stays on.
This Speaker has 5 modes:
1. Wireless connection;
2. Connection with MP3 cable;
3. Play audio/music from USB flash drive;
4. Play audio/music from Micro SD card;
5. FM radio.
a
Press MODE
A
A
G
G
WIRELESS CONNECTION
1. Turn on Bluetooth on your smartphone, tablet, etc.
and select "Bontempi 485900" to pair it with the
Speaker: an audible sound indicates that it is
connected.
2. Search through the playlist on your smartphone or
tablet for a song and play it. The track will be played on
the Speaker.
Note: for wireless connection to work, keep the device
within 9 m.
CONNECTION WITH MP3 CABLE
With a jack cable (not supplied) you can connect an
external audio source (MP3 player, tablet, smartphone,
etc., not supplied).
1. Insert the cable into the AUX socket
2. Insert the other end of the cable into the "HEADPHONE"
j
socket
of your music player or other audio source.
3. Search through the playlist on your smartphone or
tablet for a song and play it. The track will be played on
the Speaker.
E E
to switch mode.
B B
C C
h
7 7
9 9
F
F
H H
i
to ON. To
d
B B
D D
.
J J
5
Publicidad
