Return To Default Configuration; Access To Lock-Out Configuration Menu - Ditel JR-C Manual Tecnico

Return to default configuration

5s

Access to lock-out configuration menu

3s
SERIE KOSMOS
To access this menu from RUN mode, press ENTER key and while display shows
"Pro" press again ENTER for at least 5 seconds.
Display shows now "00" and '74' code must be introduced through SHIFT and UP
keys.
Finally press ENTER to validate configuration and back to RUN mode.
To access this menu from RUN mode, press ENTER key for at least 3 seconds.
Display shows now "CodE" and then "0000". Desired security code must be introduced
through SHIFT and UP keys (by default this code is 0000).
Finally press ENTER to begin with lock-out level configuration. If entered security code
is wrong, the instrument will go back to RUN mode.
www.ditel.es
JR-C / JR20-C
58