Publicidad
Idiomas disponibles
Idiomas disponibles
tArE
nO
yES
MAH
nO
yES
Once the instrument programming is completed, if there are parameters that are going to be frequently changed, a
partial lock-out is recommended. A total lock-out is recommended when configuration parameters will be constant
for a long time.
Changing default security code and keep new one in a safe place is also strongly recommended.
SERIE KOSMOS
Acces to TARE and TARE RESET functions activated through UP key
can be blocked, as well.
NOTE:
Remote TARE and remote TARE RESET lock-out through pin 4
and pin 5 from CN2 is not available. These functions remain
always active.
SHIFT key lock-out for MAX/MIN function is configurable in the same
way as previous configurations.
When lock-out is enabled (selecting "yES") it is not possible to visualize
maximum or minimum values by pressing SHIFT key, although
instrument internally continues detecting and saving new extreme
values reached by input signal.
www.ditel.es
JR-C / JR20-C
60
Publicidad
