Jägermeister G4TM Manual De Instrucciones página 111

 Make sure that the tap (1) is
properly and firmly mounted.
 Slide the air filter (2) between
the side guide rails under the
device.
 Place the drip tray (4) in the
recess in front of the air filter.
 Lock the drip tray (4) in place
with the hook (3).
After moving the device, leave it upright for 24 hours before
switching it on again. If you have moved the device, wait 30
minutes before switching it on.
Device start-up
 Clean the device thoroughly before using for the first time (see p. 115).
 Connect the device to the power supply (see p. 112).
 Insert the bottles in the bottle wells (see p. 113).
 Switch on the device (see p. 114).
English instructions for use
111