Publicidad
Idiomas disponibles
Idiomas disponibles
Components:
1.
Logo stopper
2.
Grid ring
3.
Front grill
4.
Blade fixing nut
5.
Blade set
6.
Grill fastening nut
7.
Back grill
8.
Swing knob
9.
Base
10.
Fixing plate
11.
Screws
12.
Remote control
13.
Touch panel
Place the oscillation knob on the head.
Press the oscillation knob until it adjusts correctly
Make sure the plug fits perfectly into the power outlet. A false between the power outlet and the plug may cause overheating
and/or personal or material damage.
Using the Fan
1. Connect the power cord to a power source that supplies
127 V, 60 Hz. Make sure that the plug is inserted to the
bottom and that no metal part is exposed.
2. This fan can operate with remote control and by the touch
panel of the base.
•
"ON/OFF" button (on the Remote Control and Panel): to
"ON/OFF" the fan.
Grid assembly and grilling
1
Place the rear grill on
the front of the head by
checking the guide arrow
on the grid.
3
Place the blade over the
motor shaft, verify that
the figure in the center of
the blade the position of
the arrow.
5
Place the front grill as
shown in the following
image.
7
Press the front grill
toward the rear grill so
that the tabs on the front
grill snap into place in the
corresponding lodging
orifices.
3
2
1
REAR
GRILL
HEAD
BLADE
MOTOR SHAFT
FRONT
GRILL
LODGING
TABS THE FRONT
ORIFICES
GRILL
4
5
1
10
WARNING
•
"VEL" button for speeds (in Remote Control and Panel):
speed changes at level 1 (Low), 2 (Medium), and 3 (High).
Oscillation function
• The oscillation knob prevails to initiate oscillation, pull the
knob oscillating upwards to stop this function.
2
Place the grill fixing nut
and secure the rear grill
to the head with it.
4
Fix the blades fixing nut
on the exposed threaded
motor shaft by turning
it counterclockwise until
properly fastened.
6
Verify that the arrows
located on the top of
the front and rear grills
are aligned as well as
the other tabs and their
corresponding lodging
orifices.
Take the necessary precautions to prevent
the return of gases within the room from
the open flow of gas or any other fuel-using
appliance.
7
6
8
6
5
4
3
2
13
11
12
REAR
GRILL
GRILL
FIXING NUT
BLADE
BLADE
FIXING NUT
FRONT
GRILL
WARNING
8
7
9
15
16
REAR
GRILL
CPTIM0017 R01
Publicidad
