xjump XJ 90 Guía De Usuario página 16

English
TWS PAIRING METHODS
1. Power On the Bluetooth speakers at the same time, then the LED indicator quick flashing;
2. Press and hold
the device is in the pairing mode;
3. The two speakers will connect automatically and you should hear the indicator tone. When the
status light indicator is in white, the TWS has connected successfully;
4. Under connection, search Bluetooth device and select "XJ 90" .
Note: Using the TWS function must get the two device paired at first then continuing the Bluetooth
function.
MICRO SD CARD OPERATION
1. Turn on the speaker;
2. Insert a micro SD card into the slot (10) holding the contacts facing upwards;
3. Playback will start automatically;
4. Press and hold the key
button for a few seconds to go to the previous song;
5. Press the button
AUX IN
1. Connect the Jack/Jack audio cable (NOT supplied) to the AUX jack (9) and the other end to
the external device. The device will automatically go to AUX mode;
2. Start from the external device playback.
16
(3) button of any device and the device wil issue a prompt sound. At this time,
(4) for a few seconds to go to the next song, press and hold
(5) to pause, press it again to resume playback.
(6)