Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
the specified range may damage the battery and
increase the risk of fire.
6) Service
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
7) Safety warnings for battery pack
Do not dismantle, open or shred cells or battery
pack.
Do not short-circuit a battery pack. Do not store
battery packs haphazardly in a box or drawer
where they may short-circuit each other or be
short-circuited by conductive materials. When
battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make
a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
Do not expose battery pack to heat or fire.
Avoid storage in direct sunlight.
Do not subject battery pack to mechanical
shock.
In the event of battery leaking, do not allow the
liquid to come into contact with the skin or
eyes. If contact has been made, wash the affected
area with copious amounts of water and seek
medical advice.
Seek medical advice immediately if a cell or
battery pack has been swallowed.
Keep battery pack clean and dry.
Wipe the battery pack terminals with a clean
dry cloth if they become dirty.
Battery pack needs to be charged before use.
Always refer to this instruction and use the correct
charging procedure.
Do not maintain battery pack on charge when
not in use.
After extended periods of storage, it may be
necessary to charge and discharge the battery
pack several times to obtain maximum performance.
GB
Battery pack gives its best performance when it
is operated at normal room temperature (20 °C
± 5 °C).
When disposing of battery packs, keep battery
packs of different electrochemical systems
separate from each other.
Do not use any battery pack which is not
designed for use with the equipment.
Keep battery pack out of the reach of children.
Retain the original product literature for future
reference.
Remove the battery from the equipment when
not in use.
Dispose of properly.
Do not mix cells of different manufacture,
capacity, size or type within a device.
Do not remove battery pack from its original
packaging until required for use.
Observe the plus (+) and minus (–) marks on the
battery and ensure correct use.
2. Specifications
Model NO.
Battery
Rotation speed
(No Load)
Output Torque
Charging time
Life Cycle
Charging Method
USB Charger
input
Protection
Method
Dimension
Weight
5
GS-ESD3.6V-B2
Li-ion 3.6V 700mAH
100RPM
0.3N.M @ Electric Mode ,
1.5N.M @ Manual Mode
Appro. 2 h - 3 h
300 times (Battery remains
80% Capacity)
Micro USB Type-B
5V 300mA
Over-current protection
/Over-Voltage
Protection/short-circuit
Protection
₵17*177mm
75g