Duratech GS-ESD3.6V-B2 Manual De Instrucciones Original página 6

3. Components (Fig. 1)
1. USB Charging Port Type-B
2. Micro USB Type-B
3. Charging indicator
4. Reverse Button
5. Forward Button
6. LED Worklight
7. Hex Collect
4. Operation
Loosening Screws:
1) Press and hold the
2) Loosen the screw as a regular hand tools
screwdriver
Fastening Screws:
1) Press and hold the
2) Tighten the screw as a regular hand tools
screwdriver
Environmental protection
This product has been marked with a symbol relating to removing electric and electronic waste. This
means that this product shall not be discarded with household waste but that it shall be returned to a
collection system. It will then be recycled or dismantled in order to reduce the impact on the environ-
ment. Electric and electronic equipment can be hazardous for the environment and for human health
since they contain hazardous substances.
Do not dispose of batteries, Return exhausted batteries to
your local collection or recycling point.
Button
Button
GB
5. Charging
Charge the power tool only with the USB cable
Provided. Connecting the USB cable to any possible
USB charging port (PC, Phone Charger etc. ) Possible
Charger input is 5V/0.3A, Charge rate depends on the
charge input. Unplug the USB cable from power
supply and disconnect it from the power tool once it is
fully charged.
Red LED
Green LED flicking
Green LED
6
In low Battery
Charging
Charging Complete