cecotec ENERGYSILENCE 2000 COOL TOWER SMART Manual De Instrucciones página 42

ENGLISH
- To ensure that all parts of the appliance are dry, switch it on and only put it in normal mode
for 30 minutes before storing it (the time will depend on the humidity conditions). Switch
it off and disconnect it from the mains. Empty the water tank. Clean the water tank with a
damp cloth to remove dust or mineral deposits. Remove the water tank and rinse it with
natural water to remove dirt and dust.
- To remove the rack, press both superior tabs and pull gently. Do not clean the rack by hand,
as it could deform, use a soft cloth and clean it with extreme care. Clean the filter with
a soft cloth, careful not to deform it. Place it back in place. Cover the device with a clean
cloth or a plastic bag before storing it to protect it from dust and scratches. Wind the cord
properly to avoid possible falls.
Cleaning and maintenance of the water tank
- Before cleaning the appliance, switch it off and disconnect it from the mains. Loosen the
screw on the water tank, turn the plastic tab and remove the tank. Clean the water tank and
place it again in place. Tighten the screw again in place.
- Use fresh water to clean and dry it completely. Refill the tank up to the "Max" mark with
fresh water. Use a dampen cloth to clean the dirt and dust on the surface of the device. Do
not use abrasive or corrosive detergents to clean the product. When the device is not in
use, store it in a dry place away from sunlight.
6. TECHNICAL SPECIFICATIONS
Product reference: 05289
Product: EnergySilence 2000 Cool Tower Smart
Power: 60 W, 220- 230 V~, 50/60 Hz
Manufactured in China | Designed in Spain
Description
Air cooler maximum flow
Air cooler power consumption
Service value
Power consumption on standby
mode
Air cooler sound power level
Maximum air speed
E N E R GYS I L E N C E 2000 COOL TOWER SMART
42
Symbol Value
F 13.5
P 44.3
SV 0.3
PSB 0.4
LWA 59
C 2.7
Unit
m /min
3
W
(m /
3
min)/W
W
dB (A)
m/seg