ACCUZONE MAXICOOL AZ08EWB Guia Del Usuario página 8

Window
6
Installation 1
NOTE:
one of the following two installation methods.
1. Cut Foam Seal A and B strips to the proper lengths and remove the adhesive backing. Attach them to
Method 1:
2. Insert the Window Slider assembly into the window opening.
Sliding Window
3. Cut the non-adhesive Foam Seal C strip to match the width of the window. Insert the seal between the
Installation
4. If desired, install the optional security bracket with 2 screws as shown.
5. Insert the tube Window Slider Adapter into the hole of the Window Slider.
Foam seal B
Foam seal A
Foam seal B
Once the Vent Tube assembly and Adjustable Window Slider are prepared, choose from
the window sash and frame as shown.
glass and the window frame to prevent air and insects from getting into the room.
1
3 4
Foam seal C
2
OPTIONAL